PanelMate®

The Fast and Economical Way to Anchor in Concrete or Wood

More Information   Selection Guide

Features and Benefits

• Simple installation: in concrete, use a standard 7/16" ANSI masonry bit†. In wood use a standard 7/16" (.437") wood or steel bit. Drill the hole and install the anchor. No special countersinking tool is required.
• Special external threads provide holding power in drilled hole. Anchors do not require bearing on bottom of hole, so they will work in block even if the drilled hole enters the block cavity.
• Two lengths:
  • 2-1/8" for applications with a stucco exterior
  • 1-7/16" for applications without a stucco exterior
• 1/4-20 internal threads allow use of multiple lengths of fasteners: 1-7/6" insert is fully threaded; 2-1/8" insert has 1-1/4" long internal threads.
• 5/16" internal hex drive provides strong, positive driver-bit engagement to ease installation. PanelMate® hex tools available.
• Countersinking head styles seat flush in stucco and similar materials and prevent gaps and voids around head
• Silver Stalgard® corrosion-resistant finish withstands 800 – 1,000 hours in salt spray testing per ASTM B117 standards
• Nylon locking patch on 2-1/8" insert resists back-out